Instruction manual

1. Align the angled support’s bolt to the screw

hole on the back of the DVD unit. Turn the bolt

clockwise and secure the support.

Mounting the DVD in a Car

Use the supplied mounting kit to install the DVD players on the back of the vehicle’s headrests.

2. For car headrests which can be removed, use the following method:

Lift the headrest off its leg supports. Align the horizontal support with the headrest leg slots

and ensure the horizontal support rests securely on the top of the car seat. Reattach the

headrest.

Headrest

Support

Leg

support

Horizontal

support bar

Horizontal

support bar

3. For car headrests which cannot be removed, use the following method to secure the car

mount:

Unscrew the screws holding the horizontal mounting bar together. Slip both halves of the

mounting bar around the headrests’ leg supports. Screw in the screws, loosely. Ensure that

the mounting bar is level. Tighten the screws.

If the set of 4 x screws (ø4 x 20mm) is not long enough to secure the horizontal support bar to leg

supports, please use the longer set of screws (ø4 x 25mm).

L9DUALM12_IB_121109_Michelle.indd 13 09/11/2012 11:05 AM