Datasheet
CONTRINEX AG Industrial Electronics
Route du Pâqui 5 – P.O. Box – CH 1720 Corminboeuf – Switzerland – Tel: +41 26 460 46 46
Fax: +41 26 460 46 40 – Internet: www.contrinex.com – E-mail: info@contrinex.com
Operators of the products we supply are responsible for compliance with measures for the protection of persons. The use of our equipment in applications
where the safety of persons might be at risk is only authorized if the operator observes and implements separate, appropriate and necessary measures
for the protection of persons and machines. Terms of delivery and rights to change design reserved.
d : steel mm
CORRECTION FACTORS
Steel FE 360 Copper Aluminum Brass
Stainless S. V2A 1 / 2 mm
WIRING DIAGRAM PIN ASSIGNMENT
Note: part reference may include additional suffix to indicate a revision version or special version. Further information is available on request.
INSTALLATION CONDITIONS IO-LINK FUNCTIONALITIES
IO-Link version 1.1
SIO mode Supported
Process data 7-bit input
Baudrate COM2 (38.4 kBaud)
Minimum cycle time 10.4 ms
ISDU Not supported
Note: the operating distance of the sensor must be multiplied by the correction factor of the material. For example, the operating distance on Aluminum is S
n, Al
= S
n
x CF
Al
. In case of embeddable
mounting, the distance is multiplied by the additional correction factor of the support, thus S
n, Al
= S
n
x CF
Al
x CF
emb, Al
.
Note: additional installation information can be found in the glossary of the Contrinex General Catalog.
A : metal free zone
B : sensing face
C : support
a : mm
b : mm
c : mm
AVAILABLE TYPES
Part number Part reference Polarity Connection Output on pin 2 Output on pin 4 / bk Weight
IODD files may be downloaded from
www.contrinex.com/product-range/inductive-sensors/.
Select the product name to display the product page with corre-
sponding downloads.
Alternatively, just click/scan the QR code on the left.
4
13
M8
3
1
4
2
M12
1 0.18 0.26 0.35 0.67
6
16
1
9
330-020-323 DW-AD-501-065 NPN PVC, 2 m, 3 wire - Normally open (NO) 36 g
330-020-324 DW-AD-502-065 NPN PVC, 2 m, 3 wire - Normally close (NC) 34 g
330-020-325 DW-AD-503-065 PNP PVC, 2 m, 3 wire - Normally open (NO) / IO-Link 33 g
330-020-329 DW-AD-504-065 PNP PVC, 2 m, 3 wire - Normally close (NC) 34 g
330-020-330 DW-AS-501-065 NPN M12 4-pin - Normally open (NO) 10 g
330-020-331 DW-AS-501-065-001 NPN M8 3-pin - Normally open (NO) 5 g
330-020-332 DW-AS-502-065 NPN M12 4-pin Normally close (NC) - 6 g
330-020-333 DW-AS-502-065-001 NPN M8 3-pin - Normally close (NC) 5 g
330-020-334 DW-AS-503-065 PNP M12 4-pin - Normally open (NO) / IO-Link 10 g
330-020-335 DW-AS-503-065-001 PNP M8 3-pin - Normally open (NO) / IO-Link 5 g
330-020-336 DW-AS-504-065 PNP M12 4-pin Normally close (NC) - 6 g
330-020-337 DW-AS-504-065-001 PNP M8 3-pin - Normally close (NC) 5 g
DW-Ax-50x-065_Rev 1_02.12.2019_YAG-TGF


