Instructions / Assembly

7
Model 7800 / 8800 - PRIN-2245 -0117
Contractors Wardrobe
®
, 26121 Avenue Hall, Valencia, CA 91355 | Phone: [phone] Fax: [phone] | www.CwDoor.com
STEP 6 Use and Repair
H. Install the Hollow Door Pull (#8) on the Sliding Door Panel
(#6).
A. The silicone should dry for twenty-four (24) hours before
using the Tub/Shower.
B. Do not open or close the Door with force as the Door can be
easily damaged.
C. Do not use acidic or alkaline cleaner or knife, otherwise it
will damage the Tub/Shower.
D. Clean and maintain frequently for any abnormal wear and
tear or loose parts.
J. Remove the two-way tape from Wall Polycarbonate (#15)
and attach to the wall where Sliding Door Panel (#6) makes
contact.
K. Install the Bi-Pass Splash Guard (#11) to back edge of
Sliding Door Panel (#6).
I. Adjust the two (2) Rail Stops (#3) to prevent the Sliding Door
Panel (#6) from striking the walls. Use set screws in Rail
Stops (#3) to fix them on the 1” Round Rail Tube (#2).
Thank you for purchasing a Cw
®
Tub/Shower Enclosure.
If you like this product, we invite you to visit our website
at www.CwDoor.com for more information about our
extensive line of Wardrobe Doors, Room Partitions and
Loft Dividers, Cabinet Doors, and Shower Enclosures.
They feature Duratuf
®
Tempered Safety Glass, Painted
Glass, CwShield™ Protective Coating and Duraflect
®
Copper-Free Mirror.