Users Manual

1. Restart Bluetooth pairing:

Press button B. While continuing to hold B,

press and release button C two times, then

release button B.

2. Select Bluetooth-only connectivity:

Press button B. While continuing to hold B,

press and release button C three times, then

release button B.

3. Select dongle-only connectivity:

Press button B, while continuing to hold B,

press and release button D three times, then

release button B.

Pairing and Secondary Options

• When the device is plugged in through the USB cable, this connection overrides wireless connectivity.

• Please visit contourdesign.com/BT for further information regarding your Bluetooth connection.

• If Bluetooth- or dongle-only connectivity is activated, the RollerMouse Mobile will retain

connection when the device is powered off then powered back on again.

4. Restore pairing with dongle:

Unplug then re-plug the dongle to the unit

to enable pairing. Hold the device close

to dongle and press button B. While

continuing to hold B, press and release

button D two times, then release button B.

5. Reset wireless function to

automatic pairing mode:

Press button B. While continuing

to hold B, Press and release button

C, then release button B.