User's Manual

thumb tab
Flat Surface Mount
• Unhook leash on base and loop
through camera.
• Slide camera onto rails until it clicks.
• Adhere mount to at surface (top or
side of helmet recommended).
• Hold base, pull camera away, rotate to
align, and press into mount to reattach.
Goggle Mount
• Slide camera on rails until it clicks.
• Press thumb on large tab (top of
mount) and pull camera away.
• Slide goggle strap into base.
• Align vertical angle of camera.
• Snap rails back into mount over strap.
Align
• Press power button to activate lasers.
• Aim at your hand, a wall, or other
object.
• Rotate lens to align lasers horizontally.
• Remove and reorient mount rails to
adjust mount angle. Aim a little high
for the best shot.
Resolution Settings
• Use switch under back door to select
video resolution.
HD: Amazing Clarity
1280 x 720 at 30fps
30 min avg record time/GB
135 deg. eld of view
SD: Fast Action
848 x 480 at 60fps
60 min avg record time/GB
90 deg. eld of view
• 2GB microSD card included. Accepts up
to 16GB microSD (SDHC Compatible)
Note: Always power off before ejecting
card.
Power
Recharge
• Connect to computer with USB cable.
• Red light indicates charging.
• Charge complete when camera beeps
and red light turns off. (about 3 hrs)
Power Off
• Press and hold power button 3 seconds.
• Hear a double beep and lights turn off.
• Camera automatically turns off after
15 min of inactivity.
Status
Press power button to check status.
• Memory / Battery Available
Green > 80% | Yellow 20-80% | Red <20%
• Record Status
Green = ready | Red = recording
Flashing = memory full or corrupt
Error Conditions
• Memory full: (3) beeps, recording stops.
• Memory corrupt: (3) beeps, shuts off.
• Battery dead: lights ash, beeps, shuts off.
• No beeps: camera in silent mode.
We are here to help
Keeping Shoot and Share simple is what
we are all about. We would love to help
you have a great ContourHD experience
so please contact us with any quesitons
you have.
Hours: Monday - Friday (9am to 6pm PST)
Toll Free: 866.397.6920 (USA)
International: 206.792.5226
Email: [e-mail]
Web: www.vholdr.com/support
ContourHD
Wearable Camcorder
User’s Guide
About the Camera
• Open the back door.
• Insert battery with (+) aligned and
close orange latch.
• Align back door slightly above camera and
slide down until it locks in.
Getting Ready
• Push and hold power button
(1 second) to turn on.
• Camera beeps and lights turn off.
• You are ready to record
Note: Power up with record switch forward
to enable silent mode.
Power Up
• Start recording: slide switch forward.
• Stop recording: slide switch back.
• Congrats, your rst video!
Share
• Turn camera on and connect to
computer with USB cable.
• Install VholdR Desktop directly from
MicroSD card provided or download at:
www.VholdR.com/support/software.
• Import, clip and share your videos…
Note: HD is beautiful but some computers
cannot play smooth HD video. Visit
www.vholdr.com/support for the latest
information on computer requirements.
Record
SD
HD
startstop
a Power Button
b Battery Status
c Record Button
d Rotating Lens
e Record Status
f Memory Status
a HD/SD Switch
b USB
c Charge Indicator
d Battery Latch
e Battery Slot
f MicroSD Card
a
b
c
d
e
f
a
b
c
d
f
e