User guide

3
IntroductionYour Meter Display
Your Meter Display:
The picture below shows all the symbols that appear on your meter
display. To view, with the meter off, press and hold ▲ or ▼. All dis-
play segments will appear for 10 seconds. If you need more than
10 seconds to check the display, press and hold ▲ or ▼ again.
While all characters are displayed, it is very important
to verify that is fully displayed. If there are miss-
ing segments, see Error Codes and Symbols (page
34). This may affect the way you see your results.
or will
appear if the meter
is in 12 hour setup.
Center area on the
display that shows either
your test result or any
error codes.
Top area on
the display
presenting
date and time.
Day/month format.
Results are
displayed as
mg/dL or mmol/L.
The 7 appears
when viewing 7 day
HI–LO summary.
Indicates it is too cold or
too hot for your meter to
test accurately.
Indicates sound
is turned on.
Pre-meal
result marker.
Post-meal
result marker.
Identifies a
Logbook entry.
Indicates
an alarm has
been set.
Indicates the meter is
ready to test.
Indicates the
batteries are low
and need to be
changed.
Indicates Average.
Control result marker.