User guide

Need Help? Call toll free: 1-800-348-8100

Additional

Features

Using Advanced Mode

If you do not want to mark the test result:

Remove the used test strip to automatically save the test

result in the meter memory with no markers. Dispose of the

used test strip and lancet properly. This will also turn the

meter off.

If you want to mark the test result:

Before you remove your test

strip, press ▲ or ▼ to select

the marker you want to set. The

marker will flash.

To mark a result with the

pre-meal marker, press M

when the

flashes.

The will then flash.

This feature allows you to set

an alarm to remind you to run a

post-meal test.

The alarm is available only after

setting a pre-meal marker.

If you want to set the alarm,

press M. The will appear

and stop flashing.

If you do not want to set the

alarm, press ▲ or ▼ and the

will disappear. Press M

to set.

To mark a result with the post-meal marker, press ▲ or ▼

until the flashes. Press M to set.

To mark a result with the logbook, press ▲ or ▼ until the

flashes. Press M to set.