User guide

USING THE
MAINMENU
52
USING THE
MAINMENU
53
Alerts are set.
Done
Change
High: 13.9
mmol/L
Low: 3.8
mmol/L
6. Press the  or  button
to select your High and
Low Alert. Press OK after
each selection.
High and Low Alerts
Language
Customer Service
OK
SETUP
Language:
English
OK
No
LANGUAGE
English
Deutsch
Español
OK
HIGH AND LOW ALERTS
High: 13.9
mmol/L
Low:
3.9
mmol/L
OK
7. The next screen confirms
your choices. Press Done.
6. Select 7, 14, 30 or 90 Day
by using the  button and
then press OK.
A screen confirms your
choice.
OK
7 Day
14 Day
30 Day
90 Day
TRENDS RANGE
Accept
Change
HIGH AND LOW ALERTS
High: 13.9
mmol/L
Low: 3.9
mmol/L
3. Press the  button to
highlight High and Low
Alerts. Press OK to select.
4. Choose Accept to use
the preset Alert levels
(or the Alert levels you
chose during initial
setup) for High and Low
Alerts. The preset High
Alert is 13.9mmol/L and
the preset Low Alert is
3.9 mmol/L.
5. Choose Change if you
wish to use different
Alert levels.
Trends Range
High and Low Alerts
Language
OK
SETUP
®
High and Low Alerts
Set Language
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to
Setup .
5. Verify that the language
you selected is displayed.
Press
OK to confirm.
If the correct language is
not displayed, press
No .
3. Press the  button to
highlight
Language . Press
OK to select.
Customer Service
This option is to be used if you are speaking to a Bayer
Customer Service representative. They will give you a code
that enables them to verify certain settings. It is not for use any
other time. Please see back cover for contact information.
4. Press the  or  button
to select the language
you prefer. Press  to see
more choices. Press OK.
High and Low Alerts
The High and Low Alerts tell you that your test result is above
or below the setting you choose. Alerts appear as large orange
numbers. Results above High are marked High Blood Sugar.
Results below Low are marked Low Blood Sugar.
NOTE: Alerts can only be set outside your selected
Target Range(s). For additional information, you may
contact Customer Service. Contact information for
Customer Service is on the back cover.
WARNING
Talk to your health care professional before setting any
High or Low Alerts on your meter.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to
Setup .
Set Language
84766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 52-5384766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 52-53 3/27/13 7:58 AM3/27/13 7:58 AM