User guide

USING THE
MAINMENU
50
USING THE
MAINMENU
51
6. Repeat this process to set your personal Before Meal
Targets and After Meal Targets.
7. Press
OK after each selection.
Targets are set.
Done
Change
3.9 - 7.2
3.9 - 10.0
3.9 - 10.0
Trends Range
The Trends feature displays your averages and your results as
they compare to your Targets, over a period of time that you
select. The options available are 7, 14, 30 and 90 day averages.
Your meter has been preset to 14 day averages, but you can
change this in Setup.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to Setup.
A screen confirms that all
Target ranges are set.
If correct, press Done to return to the Setup Menu.
To make changes, press Change and repeat the process.
5. Your current setting is
displayed. You can Accept
or Change your current
setting.
Target
Trends Range
High and Low Alerts
OK
SETUP
TRENDS RANGE
Accept
Change
CURRENT SETTING
14 Day
NOTE: Your 90 day average is not intended to be reflective
of your HbA1c result.
3. Press the  button to
highlight
Trends Range .
4. Press
OK to select.
5. Use the  or  button to
change each value of the
Target. Press
OK after each
selection.
A screen confirms
your choice.
TARGET
4.2 - 10.0
OK
Target is set.
Done
Change
4.2 - 10.0
TARGET
Accept
Change
Fasting
3.9 - 7.2
4. To make changes to your
Fasting Target range,
press Change, otherwise
press Accept.
SETUP
OK
AutoLog
Target
Trends Range
3. Press the  button to
highlight Target. Press OK
to select.
5. Press the  or  button
to select your desired
Fasting Targets. Press OK
after each selection.
TARGET
OK
Fasting
3.9 - 7.2
®
Changing Targets With AutoLog On
Trends Range
Changing Targets With AutoLog On
When AutoLog is ON, your CONTOUR
®
NEXT LINK meter comes
preset with the following Target ranges for testing:
Fasting 3.9 - 7.2 mmol/L
Before Meal 3.9 - 7.2 mmol/L
After Meal 3.9 - 10.0 mmol/L
Ranges can be changed to personal Targets decided by you
and/or your health care professional.
NOTE: Targets can only be set inside your selected Alert
level(s). For additional information, you may contact
Customer Service. Contact information for Customer
Service is on the back cover.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to Setup.
84766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 50-5184766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 50-51 3/27/13 7:58 AM3/27/13 7:58 AM