User guide

USING THE
MAINMENU
38
USING THE
MAINMENU
39
3. Press OK to select Pump
Options.
5. Press
OK to begin the
connection process.
Pump Options
Reminder
Date
OK
SETUP
6. STOP. Do NOT press
ANY buttons.
This screen displays the
meter ID number (in the
bottom left corner). This
ID is needed to complete
the connection process.
Put down your meter.
Pick up the compatible
Medtronic device and
continue with Step 7.
7. Press
ACT to go
to the MAIN MENU .
Scroll to Utilities by
pressing the down
arrow. Press ACT .
Connect to a MiniMed
Pump?
CONNECT TO PUMP
OK
Go Back
Setup
You can view and change options on your meter and
personalize it from the Setup Menu.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to Setup.
OK
SETUP
Pump Options
Reminder
Date
Time
Sound
AutoLog
Target
Trends Range
High and Low Alerts
Language
Customer Service
The current settings in the
meter for the Reminder,
Date, Time, Sound and
AutoLog can be viewed
by scrolling through the
Setup Menu items. To
view the settings of the
other items, or to make
any changes to any of the
items, you can select the
item using the  and 
keys and pressing OK.
1. Press and hold the top Menu button to turn the meter on.
2. Press the button next to Setup.
Send Options
Connection
Go Back
PUMP OPTIONS
4. Press Connection .
NOTE: Pump refers
to your compatible
Medtronic device.
Enter this Meter ID
into your Pump:
123456
CONNECT TO PUMP
Next
Go Back
MAIN MENU
Basal
Reservoir + Set
Utilities
®
Setup
Connecting the Meter and Pump
Pump Options
Pump Options allows you to connect to a Medtronic pump and
change your Send Settings (how your blood sugar readings are
sent to your pump).
Connecting the Meter and Pump
You can send blood sugar results to your pump if your meter
and pump are connected.
84766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 38-3984766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 38-39 3/27/13 7:58 AM3/27/13 7:58 AM