User guide

TESTING
16
TESTING
17
STRIP UNDERFILLED
APPLY MORE BLOOD NOW
9.3
5
TESTING...
After applying blood to the
test strip when AutoLog is
turned OFF, your result will
appear after the 5 second
countdown.
Too Little Blood
Remove used strip.
Repeat test with new
strip.
E01
If you do not re-apply
enough blood within about
30 seconds, you will see a
screen telling you to remove
the strip and repeat with a
newstrip.
If
Always was selected in
Send Options during Setup,
your result is automatically
sent to your pump. If Never
was selected in Send
Options, you will not have the option to send the result to your
pump. If Ask Me was selected in Send Options, you can choose
to send your result to your pump after each blood sugar test.
Press Send or Don’t Send . If Send is chosen, press OK on the
Send confirmation screen.
Leave the test strip in the meter to set an optional reminder for
your next test (see page 31) or adda note (see page 34).
YOUR RESULTS
Send
Don’t Send
9.3
mmol
L
If you are done, remove the test strip from the meter. Press and
hold the top Menu button to turn off the meter. The meter also
turns off after 3minutes of inactivity.
10:30 AM | 10/11
Reminder
Notes
9.3
mmol
L
Sent
®
Apply More Blood
Test Results
4. Immediately touch the tip of
the test strip to the drop of
blood. The blood is pulled
into the test strip through
the tip.
Apply More Blood
Test Results
Testing With AutoLog Off
Hold the tip of the test strip in the blood drop until the
meter beeps.
Do not press the tip against the skin or place the blood on top
of the test strip or you could get inaccurate results or errors.
If the first blood drop is not
enough, the meter will beep
twice and display “STRIP
UNDERFILLED” and “APPLY MORE
BLOOD NOW.” You have about
30 seconds to apply more
blood to the same strip.
CAUTION: Always check the display on your pump to
ensure that the glucose result shown agrees with the
glucose result shown on the meter.
3. Test immediately after
a good drop of blood
hasformed.
84766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 16-1784766780_CntrNextLINK_UG_ENca_FpBp_v0.indd 16-17 3/27/13 7:58 AM3/27/13 7:58 AM