Spec Sheet

FRONT VIEW
SIDE VIEW
Model Specifications
© Copyright 2014. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
®
MADE IN THE U.S.A.
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
Toll-Free: 800-523-7138
Phone: [phone]
Fax: [phone]
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Model Plan Views
05/27/10
Equipped with one NEMA-5-15P Plug
(varies by country)
6”
(152 mm)
83 1/4”
(2115 mm)
77 1/4”
(1962 mm)
58 5/8”
(1489 mm)
DOOR OPENING
19 3/8”
(492 mm)
DOOR OPENING
26”
(660 mm)
DL1RS (10/8/14)
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is in-
stalled on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained within
a concealed “plug”-type insulated housing, read-
ily accessible on top of the cabinet and separate
from the food zone to increase food storage ca-
pacity. The entire “plug” system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38°F-40°F
(3°-5° Centigrade) while operating with an unre-
stricted air supply in a maximum ambient tempera-
ture of 100°F. All condensate water is evaporated
by an automatic, non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to cer-
tify that each model conforms to the most exacting
standards. All models are factory performance-
tested for a minimum of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
SHELVING
Shelves are designed for heavy-duty use with .306”
diameter frame and brace members and .140” di-
ameter fill wires spaced 3/4” apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life. Adjustments are in 1 inch in-
crements and a wide door opening allows the use
of a variety of optional pan and tray slide types.
CABINET CONSTRUCTION
All materials are of top quality, assembled to con-
form with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally sup-
ported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an aver-
age thickness of 3 inches to ensure increased ener-
gy efficiency. Full-length louvered air grille located
above the doors allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heaters concealed by a non-me-
tallic, non-conductive, high-impact thermal breaker
strip eliminate condensate build-up on the cabinet
front. Automatic interior lighting is activated by
an easily accessible interior switch. Cabinets are
equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavy-
gauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavy-
duty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are pro-
vided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.
DIMENSIONAL DATA
Net Capacity (cu. ft.) 16 (453 cu l)
Width, Overall (in.) 26 (660 mm)
Depth, Overall (incl. handle) (in.) 29 1/4 (743 mm)
Depth [less door] (in.) 25 7/8 (657 mm)
Depth [door open 90°] (in.) 49 1/2 (1257 mm)
Clear Door Width (in.) 19 3/8 (492 mm)
Clear Door Height (in.) 58 5/8 (1489 mm)
Height, Overall (incl. 6” legs) (in.) 83 1/4 (2115 mm)
No. of Doors 1
No. of Shelves 3
Shelf Area (sq. ft.) 20.4 (1.9 sq m)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 1940
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Feed Wires (incl. ground) 3
Total Amps (int’l) 5.5 (3.5)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 31 5/8 (803 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 65 (1841 cu l)
Weight Std - Crated (lbs.) 300 (136 kg)
Weight SS - Crated (lbs.) 380 (172 kg)
Weight Std - Uncrated (lbs.) 220 (100 kg)
Weight SS - Uncrated (lbs.) 280 (127 kg)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
29 1/4”
(743 mm)
25 7/8”
(657 mm)
22 7/8”
(581 mm)
58 1/8”
(1476 mm)