Spec Sheet

Model Specifications
© Copyright 2020. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
MADE IN THE U.S.A.
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Model Plan Views
FRONT VIEW
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required on top and 3” on sides and rear.
05/27/10
Equipped with two NEMA-5-15P Plugs
(varies by country)
®
27 1/2”
(699 mm)
DOOR OPENING
52”
(1321 mm)
77 1/4”
(1962 mm)
5”
(127 mm)
82 1/4”
(2096 mm)
19 3/8”
(492 mm)
DOOR OPENING
54 3/4”
(1391 mm)
29”
(737 mm)
32”
(813 mm)
34”
(864 mm)
35 3/8”
(899 mm)
2RFNHD (4/6/20)
DIMENSIONAL DATA
Net Capacity (cu. ft.) 20/20 (566/566 cu l)
Width, Overall (in.) 52 (1321 mm)
Depth, Overall (in.) (incl. handles) 35 3/8 (899 mm)
Depth (in.) (less doors) 32 (813 mm)
Depth (in.) (doors open 90°) 55 1/2 (1410 mm)
Clear Door Width (in.) 19 3/8 (492 mm)
Clear Half Door Height (in.) 27 1/2 (699 mm)
Height, Overall (in.) (incl. 5” casters) 82 1/4 (2089 mm)
No. of Doors 4
No. of Shelves 6
Shelf Area (sq. ft.) (per section) 20.4 (1.9 sq m)
Tray Slide Capacity (per half section) 11
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/4+, 1/2
Capacity (BTU/Hr)* 1940 / 1590
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Feed Wires (incl. ground) 3 / 3
Total Amps (int’l) 5.2 (3.5) / 7.6 (5.2)
Defrost Amps (int’l) 4.4 (3.2)
(2) 10 ft. Cord/Plug [attach.] (int’l) Yes (No)
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 64 (1626 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 133 (3766 cu l)
Weight Std - Crated (lbs.) 580 (227 kg)
Weight SS - Crated (lbs.) 700 (318 kg)
* Rating @ +25°F evaporator, 90°F ambient (refrigerator)
* Rating @ -15°F evaporator, 90°F ambient (freezer)
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.