User's Guide

Installation/User Guide
6
Internal
3. Installation Checklist
The following is an installation checklist broken down by task.
Task
#
Task Required? Page # Complete?
1 Inventory all V4C equipment Required
2 Layout all cables and accessories according to: Required
3 -General guidelines Required
4 -V4C device and mounting plate instructions Required
5 -Power / Data cables instructions Required
6 -External GPS Antenna guidelines If used
7 -Discrete input system instructions If used
8 Disconnect vehicle battery ground cable Suggested
9
Install V4C Power / Data cable. Do not connect 4 Pin
connector to V4C at this time. Do not connect OBDII
connector to vehicle at this time (If used)
Required
10 Install Discrete Input cable If used
11 Install external GPS antenna If used
12 Install V4C Required
13 Interconnect all cables & wires to V4C (except 4 pin
power)
Required
14 Reconnect vehicle battery ground cable Suggested
15 Connect 4 pin power cable to V4C Required
16 Start engine Required
17 Connect OBDII connector to vehicle (if used) Required
18 Complete V4C System functional checkout & checklist Required
19 Shutdown engine Required