User's Guide

Installation/User Guide

Internal

8.3. Mounting Surface

Mount onto an interior flat surface that is large enough to accommodate the footprint.

Suggested mounting areas include the following:

 Horizontal mount on dashboard under an angled windshield free of metallic obstructions

 Overhead compartment mount with a clear non-metallic view of the sky (for example, under a

fiberglass roof or fairing).

Note: Verify placement acceptability with state DOT/law enforcement prior to installation.

Enclosed areas require an external GPS.

8.4. Mounting Considerations

 Avoid mount areas with difficult access or areas that do not allow for direct diagnostic LED

viewing.

 Do not mount near other radio equipment such as two-way radios, PA equipment and high energy

electrical sources (e.g., cables, relays, amplifiers, etc.).

 Avoid dirty, dusty, or damp mount areas (for example, near floors and entry ways).

 To prevent water damage, do not install below windows or doors that open to the vehicle’s

exterior.

Note: If enclosing in a radio-shielded area (for example, metallic enclosure) an external GPS

antenna may be necessary for proper operation and performance.