User's Manual

Paring New Phone
1. Long press the SETUP/VR button will initiate a paring sequence to a
mobile phone. The user can also short press the SETUP/VR button to
enter Setup Menu. Use voice command “Pair Device”, then follow the
prompt to launch the paring process. (Figure 2.1 Setup Menu)
2. The system prompts: Set your device in scan mode and enter 0000
when prompted for the pass code.
3. When the mobile phone finishes its search, it will prompt the user to
select the device with which to pair. Select “Chery BTHF” and the phone
will display the pass code entry screen.
4. Enter the pass code: 0000
5. The system prompts: Pairing complete. Please say a friendly name for
the device.
Note: Some phones may ask to accept the BT link. Enter Yes.
6. Please say a friendly name for the device, such as “Zhang San”/ “Moto
V3”
7. Upon successful completion, the system responds: <Device Name>
added.