User Guide

10 min.

• Product is NOT designed for hot liguids. Use only with cold liquids.

• Not for use with carbonated or pulpy beverages.

• Always press the AUTOSEAL

button with the bottle in an UPRIGHT position prior to tipping

it to drink. This will release any built-up pressure. Release button to seal.

• Prior to drinking, make sure the lid is properly threaded to the body and screwed on completely.

• Avoid accidental depressing of the AUTOSEAL

button by keeping the button free and clear

of other objects.

• DO NOT overll. Fill liquids to just below the threading in the body.

• DO NOT microwave or freeze.

• DO NOT use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.

• DO NOT continue to use product if damaged.

• DO NOT carry bottles containing liquid in bags to help prevent accidental opening.

USAGE RECOMMENDATIONS

• The AUTOSEAL lid is designed to help prevent spills from accidental tipping.

• The AUTOSEAL lid that came with your new purchase is designed to only t your Contigo

water bottle. Not for use with other products.

CLEANING INSTRUCTIONS

• Wash thoroughly before rst use.

• RINSE LID IMMEDIATELY AFTER EACH USE with

warm water, pressing the AUTOSEAL

button so

water ows through the Drink Spout and Vent Hole.

• Lid, plastic body and straw are top-rack

dishwasher safe.

• Hand-wash stainless steel body.

• If washing by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash body with

warm water and a mild detergent. Rinse both the lid and body thoroughly before use.

• For best results, use a Contigo

bottle brush, www.GoContigo.com.

• ALWAYS STORE BOTTLE WITH LID REMOVED to allow parts to dry completely.

PRESS BUTTON

to open

TIP

to drink

RELEASE BUTTON

to Automatically Seal

AUTOSEAL® Water Bottle

Care and Use Instructions

CAUTION

Should you have any questions about your purchase, please