User Manual

Opening and closing 55
Controls and equip-
ment
Safety first Vehicle operation Vehicle care Do-it-yourself service Technical data
the anti-theft alarm when you try to start the engine or open a door.
In case this happens anyhow, push the unlock button
8.
• Use the panic function only if you are in an emergency
situation.
Reactivating remote control
The remote control must be synchronized if the vehicle
does not unlock.
– Press one of the buttons on the remote control.
– Lock or unlock the vehicle one time using the key in the
door lock.
The entire synchronization process must be completed within one
minute to be successful.
Certification
The remote control device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including
interference that may cause undesired operation.
Canada models: The remote control device complies with RSS-210
of Industry Canada. Operation is subject to the following conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including
interference that may cause undesired operation.
The manufacturer is not responsible for ANY RADIO OR TV interfer-
ence caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the
equipment.
Doors, power locks
Operating locks from with key
To lock and unlock the vehicle from the outside, turn
the key in the lock of the driver’s door.
To unlock the driver’s door only
– Insert the key into the lock of driver’s door.
BA
B8E-029
Fig. 33 Key turns for
opening and closing.
s3p.book Seite 55 Freitag, 5. Juli 2002 12:05 12