User Manual

Opening and closing 63
Controls and equip-
ment
Safety first Vehicle operation Vehicle care Do-it-yourself service Technical data
Tilt sensors <
The tilt sensors trigger an alarm if they detect move-
ment inside the vehicle.
Switch off the tilt sensors if you are going to have your
vehicle transported.
Switch off the tilt sensors
– Pull the switch
< located in the driver’s door Þ fig. 42.
– Lock the vehicle.
When you turn off the tilt sensors, the diode in the switch < will illu-
minate. Also, the indicator light in the driver’s door will illuminate
for about 3 seconds. After you lock the vehicle, the indicator light in
the driver’s door will blink quickly for about three seconds. After
that, the blinking slows down.
The next time the vehicle is locked, the tilt sensors are automatically
turned on again.
Power windows
Controls
The switches are located in the driver’s door. Also the front
passenger’s has its own power window switch.
If the respective switch is pushed or pulled the window will open or
close.
Switches for front door windows
operates the window in the driver's door.
operates the window in the front passenger's door.
BH0-0275
Fig. 42 Driver's door:
tilt sensor switch
A
C
B
D
E
BH0-0042
Fig. 43 Driver's door:
power window
switches
A
A
A
B
s3p.book Seite 63 Freitag, 5. Juli 2002 12:05 12