User guide

Overview
The IP-232 extends Ethernet control to CR’s 232-series TV tuners, video projectors, displays, and other RS-
232 controlled equipment. The IP-232 is PoE compliant, accepting power through the LAN in either A or B
modes. The unit is fully programmable, and includes switch settings to aid in installation.
A single IP-232 can control up to nine tuners over Ethernet, with a full 2-way data connection to custom
control systems or PC software. CR’s Tuner Helper 3, a free Windows application, can connect to the IP-232
for point-and-click Ethernet tuner control and setup.
• Extends RS-232 control over Ethernet
• Controls up to nine CR 232-series tuners (up to 9 can be daisy-chained from RS-232 port)
• Powers from Ethernet (PoE) in A and B modes
• Integrates any RS-232 controlled device, including video projectors, displays,
• Works with CR’s free Tuner Helper 3 software for graphic Ethernet tuner control for CR tuners
• Operates with Telnet commands from AMX, Crestron, Simtrol, other control systems, and PC
software
• Sets up from IP, RS-232 port, and onboard DIP switches
• Mounts in RK3 AV System Tool Rackmount or alongside AV tuner in RK-1 or RK-HD1 rack mounts.
• Includes power supply
• Meets RoHS safety and California energy standards
•
Operates from Crestron (24 VDC) and AMX (12 VDC) DC power supplies