Datasheet

Contelec AG
Portstrasse 38
CH-2503 Biel/Bienne
Phone +41 (0)32 3665600
Telefax +41 (0)32 3665604
sales@contelec.ch
A company of the Siedle-Group
Errors and omissions excepted. Subject to
change without notice. State: 27.09.10
Vert-X 28 - 24V / 4 - 20mA
Ordering code
* Switch outputs
Please define number
(max. 127), position and width
of the pulses.
Options (on request)
Vert-X 2 8 0 1 7 3 6 6 2 1 1 0 2
Electrical angle
36 Standard Electrical angle 360°
xx Optional 03 to 35; Declaration in 10° steps
99 Optional Special angle
Sensor principle
7 MH-C
8 MH-C2
Mechanical version
2801 Standard 6mm shaft D-shape; IP54
2821 Optional Push on coupling; IP54
2831 Standard 6mm shaft D-shape; IP65
2841 Optional Push on coupling; IP65
2899 Optional Special shaft
Length of wires
01 Optional 10cm
03 Optional 30cm
05 Standard 50cm
99 Optional Special length
Length of cable
02 Standard 1.0m
06 Optional 3.0m
10 Optional 5.0m
99 Optional Special length
Electrical connection
1 Standard Round cable 3pole
2 Optional Wires 4pole
3 Optional Wires 5pole
4 Optional Wires 6pole
9 Optional Special cable / wires
Output characteristics
Positive gradient CW Standard 1
Positive gradient CCW Optional 2
Redundant, positive gradient CW Optional 3
Redundant, positive gradient CCW Optional 4
Redundant, crossed signal curves Optional 5
Positive gradient CW with 1 switch output* Optional A
Positive gradient CCW with 1 switch output* Optional B
Positive gradient CW with 2 switch outputs* Optional C
Positive gradient CCW with 2 switch outputs* Optional D
Sense of rotation settable Optional E
Zero point & sense of rotation settable Optional F
Middle point & sense of rotation settable Optional G
Start + end point & sense of rotation settable Optional H
Programmable with Vert-X EasyAdapt Optional P
Output signal
4mA ... 20mA Standard 2
Power supply voltage
24VDC Standard 6
MH-C MH-C2
Custom shaft design X X
Custom cable / wires X X
Sample rate in fast mode X X
Switch functions TTL (max. 2) X X
Special characteristic curve - X
Special electrical angle within 30° to 360° (ex factory) X X
Electrical angle programmable (Software) - X
Start & end point settable (Additional wires) - X
Sense of rotation CW/CCW settable / programmable (Additional wires or Software) - X
Index point settable / programmable (Additional wires or Software) - X