Datasheet

Contelec AG
Portstrasse 38
CH-2503 Biel/Bienne
Phone [phone]
Telefax [phone]
[e-mail]
A company of the Siedle-Group
Errors and omissions excepted. Subject to
change without notice. / State: 27.09.10
Vert-X 22 - 24V / 4 - 20mA
Ordering code
* Switch outputs
Please define number
(max. 127), position and width
of the pulses.
Options (on request)
Vert-X 2 2 0 1 7 3 6 1 5 1 4 0 2
Electrical angle
36 Standard Electrical angle 360°
xx Optional 03 to 35; Declaration in 10° steps
99 Optional Special angle
Sensor principle
7 MH-C
8 MH-C2
Mechanical version
2201 Standard Bushing M10x0,75 ; 6 mm shaft D-shape ; IP54
2202 Standard Bushing M10x0,75 ; 3,175 mm shaft slotted ; IP54
2211 Standard Servo mount size 9 ; 6 mm shaft D-shape ; IP54
2212 Standard Servo mount size 9 ; 3,175 mm shaft slotted ; IP54
2231 Standard Bushing M10x0,75 ; 6 mm shaft D-shape ; IP67
2232 Standard Bushing M10x0,75 ; 3,175 mm shaft slotted ; IP67
2241 Standard Servo mount size 9 ; 6 mm shaft D-shape ; IP67
2242 Standard Servo mount size 9 ; 3,175 mm shaft slotted ; IP67
2299 Optional Special housing ; Special shaft
Length of cable
02 Standard 1.0m
06 Optional 3.0m
10 Optional 5.0m
99 Optional Special cable
Electrical connection
4 Standard Round cable 3pole
6 Optional Round cable 6pole
9 Optional Special cable
Output characteristics
Positive gradient CW Standard 1
Positive gradient CCW Optional 2
Redundant, positive gradient CW Optional 3
Redundant, positive gradient CCW Optional 4
Redundant, crossed signal curves Optional 5
Positive gradient CW with 1 switch output* Optional A
Positive gradient CCW with 1 switch output* Optional B
Positive gradient CW with 2 switch outputs* Optional C
Positive gradient CCW with 2 switch outputs* Optional D
Sense of rotation settable Optional E
Zero point & sense of rotation settable Optional F
Middle point & sense of rotation settable Optional G
Start + end point & sense of rotation settable Optional H
Programmable with Vert-X EasyAdapt Optional P
Output signal
4mA ... 20mA Standard 5
Power supply voltage
24VDC Standard 1
MH-C MH-C2
Custom shaft design X X
Custom modification of the housing X X
Custom cable X X
Sample rate in fast mode X X
Switch functions TTL (max. 2) X X
Special characteristic curve - X
Special electrical angle within 30° to 360° (ex factory) X X
Electrical angle programmable (Software) - X
Start & end point settable (Additional wires) - X
Sense of rotation CW/CCW settable / programmable (Additional wires or Software) - X
Index point settable / programmable (Additional wires or Software) - X