Datasheet

Contelec AG
Portstrasse 38
CH-2503 Biel/Bienne
Phone [phone]
Telefax [phone]
[e-mail]
A company of the Siedle-Group
Errors and omissions excepted. Subject to
change without notice. State: 02.02.12
Vert-X 16 - 5V / 10...90% Ub
Ordering code
Vert-X 1 6 0 1 7 3 6 2 2 1 2 0 2
Electrical angle
36 Standard Electrical angle 360°
xx Optional 10 to 35; Declaration in 10° steps
99 Optional Special angle
Sensor principle
7 MH-C
Length of wires / ribbon cable
01 Optional 10cm
02 Standard 20cm
03 Optional 30cm
04 Optional 40cm
05 Optional 50cm
99 Optional Special length
Electrical connection
1 Optional Ribbon cable 6pol
2 Standard Wires 3pol
9 Optional Special cable; special wires
Output characteristics
1 Standard Positive gradient CW
2 Optional Positive gradient CCW
3 Optional Redundant, positive gradient CW
4 Optional Redundant, positive gradient CCW
5 Optional Redundant, crossed signal curves
Output signal
2 Standard 10%...90%Ub
4 Optional x%...y%Ub(within5...95%)
Power supply voltage
2 Standard 5VDC
Mechanical version
1601 Standard 6mm shaft D-shape ; IP54
1631 Standard 6mm shaft D-shape ; IP65
1699 Optional Special shaft
Options (on request)
MH-C MH-C2
Custom shaft design X -
Custom cable / wires X -
Interfacex%...y%Ub(within5%...95%Ub)   X -
Sample rate in fast mode X -
Special electrical angle within 30 to 360° (ex factory) X -
Special characteristic curve - -
Electrical angle programmable by customer (Software) - -
SwitchfunctionsTTL(max.2)   - -
Index-point setting by customer (Additional wire or Software) - -
Positive gradient setting (CW/CCW) by customer (Additional wire or Software) - -