User Manual

...to complete your networkwww.conteg.com
CONTEG SOLUTIONS
for the next decade!
4
HVMSHM60/60
The HVMS-H-M holders are used for tting vertical cable
trays in racks. The holder can be used also as cable holder.
SIDE CABLE GRIDS
Panels DP-VV are used to guide and
support vertical cables in free-standing
racks between 19" extrusions and side
panels.
Code
Usedinrackheight(U)
panelswidth150mm panelswidth300mm
DP‑VV‑15U/150 DP‑VV‑15U/300 15
DP‑VV‑18U/150 DP‑VV‑18U/300 18
DP‑VV‑21U/150 DP‑VV‑21U/300 21
DP‑VV‑24U/150 DP‑VV‑24U/300 24
DP‑VV‑27U/150 DP‑VV‑27U/300 27
DP‑VV‑30U/150 DP‑VV‑30U/300 30
DP‑VV‑33U/150 DP‑VV‑33U/300 33
DP‑VV‑36U/150 DP‑VV‑36U/300 36
DP‑VV‑42U/150 DP‑VV‑42U/300 42
DP‑VV‑45U/150 DP‑VV‑45U/300 45
DP‑VV‑48U/150 DP‑VV‑48U/300 48
Code Dimensions in mm
Used in rack depths
(in mm)
HVMS‑CH‑400 404x181 600,800,1000
HVMS‑CH‑500 504x181 600,800,1000
HVMS‑CH‑600 604x181 800,1000
HVMS‑CH‑700 704x181 800,1000
HVMS‑CH‑800 804x181 1000
Code
Used in rack sizes (in mm)
ROF/RMF/RDF/RHF/RSF SEVEN family
HVMS‑H‑M‑60/60
600x600,800x600
600x1200,800x1200
HVMS‑H‑M‑60/80 600x800,800x800
HVMS‑H‑M‑60/100 600x1000,800x1000
HVMS‑H‑600 600x600,800x600 600x600,800x600
HVMS‑H‑800 600x800,800x800 600x800,800x800
These grids are used for managing
cables in the sides of rack behind the
19“ extrusions.
DESCRIPTION:
• Installationpossibleinracks600,800and
1000mmdeep
• Theinstallationkitispartofdelivery
• Cabletiesarenotpartofdelivery
HORIZONTAL HOLDERS FOR CABLE TRAYS
AND SIDE CABLE MANAGEMENT
CABLE BASKET TRAYS
Cable basket trays HVMS-B are used to guide and support
vertical cables in free-standing racks between 19" extrusions
Code
Dimensions in mm
Used in rack
height (U)
H W D
HVMS‑B‑600‑140/30 605 170 35 15,18
HVMS‑B‑800‑140/30 805 170 35 21
HVMS‑B‑1000‑140/30 1005 170 35 24,27
HVMS‑B‑1400‑140/30 1405 170 35 33,36
HVMS‑B‑1800‑140/30 1805 170 35 42,45,48
HVMS‑B‑600‑140/60 605 170 65 15,18
HVMS‑B‑800‑140/60 805 170 65 21
HVMS‑B‑1000‑140/60 1005 170 65 24,27
HVMS‑B‑1400‑140/60 1405 170 65 33,36
HVMS‑B‑1800‑140/60 1805 170 65 42,45,48
DESCRIPTION:
• HVMS‑H‑M:forROFfamilyrackseries,
mountedtorackframe
• HVMS‑H:forallrackseries(recommendedfor
RM7andRI7),mountedonverticalextrusions
• Possibilitytoinstallplasticcablebrackets
• Setincludes2holders
• Mountingkitincluded
DESCRIPTION:
• Applicationinfree‑standingracks15–48U
high
• Availablewidths–150mmand300mm
• Installationeitherdirectlyintopandbottom
frameoftherack(OPTIMAL/PREMIUM
racksfamilyonly)oronholdersofvertical
extrusions(allfree‑standingrackseries)
• Installationkitisincludedindelivery
SIDE CABLE PERFORATED PANELS
HVMSB
HVMSCH
and side panels.
DESCRIPTION:
• 140x30mm(WxD):couldbemounted
betweenhorizontalholderandsidepanel
• 300x60mmand400x60mm(WxD);mounted
oninnersideofhorizontalholder
• 140x60mm(WxD):mountedoninnersideof
horizontalholder
• Producedforracksizes15‑48U
• Mountedonholdersofverticalextrusions,
horizontalholdersareneededforracksof
18,21and27U;forRI7andRM7onlysizes42
and45U
• Setofttingsincluded
Code
Dimensions in mm
Used in rack
height (U)
H W D
HVMS‑B‑1800‑300/60 1805 325 65 42,45,48
HVMS‑B‑1800‑400/60 1805 425 65 42,45,48
DVVV42U/300