User's Manual

8. Appendix
68
NZ2WL - xxx
Table 8.1. Initial Setting List <5 / 5 >
Item Default setting
VLAN (AP only)
VLAN function Disable, enable
VLAN ID 1, 1 - 4094
Guest connection Enable, disable
Guest VLAN ID 1, 1 - 4094
VLAN table
ESSID (Empty)
VLAN ID (Empty), 1 - 4094
Encryption (Empty)
Log function
Log function Disable, enable
File save Disable, enable
Overwrite mode Enable, disable
Debug Log Disable, enable
Starting
day/time setting
Starting day/time setting
function
Disable, enable
Starting day/time 2002, January 1, 00:00
Setting on
details
Log in ON, OFF
Log out ON, OFF
Log in NG ON, OFF
Roaming ON, OFF
Tunnel start ON, OFF
Tunnel stop ON, OFF
Application login ON, OFF
Application logout ON, OFF
Authentication ON, OFF
Date/Time Set ON, OFF
*1 These are theoretical values based on their respective wireless LAN standards. They do not indicate actual data transfer rates.
*2 This varies depending on the encryption function of the wireless LAN in use.
Encryptions other than those described below 254
IEEE802.1X 124
AES (when using WPA function) 128
TKIP (when using WPA function) 32