User's Manual

8. Appendix
NZ2WL - xxx
67
Table 8.1. Initial Setting List <4 / 5 >
Item Default setting
Extended function
Bridge Packet Control Disable, enable
Network time
Function Disable, enable
IP address 0.0.0.0 (Disable)
Time zone +09:00
Access control
TELNET server function Enable, disable
FTP server function Enable, disable
WEB server function Enable, disable
Administrator IP
specification
Disable, enable
Administrator IP address
1 - 2
0.0.0.0 (Disable)
Wireless access Enable, disable
Network delay time (seconds) 0, 0 - 15
Setting file encryption Disable, enable
Protocol Filter
Function Disable, enable
Operation of unspecified
protocols
Allow, block
Roaming Notification
Send notification packets Enable, disable
First login notification Enable, disable
Notification packet bridge Enable, disable
Delete System Files (INIT-SW) Disable, enable
CPU Power-save Mode Disable, enable
SNMP
SNMP agent function Disable, enable
Community name public
Access right Read/Write, Read Only
Trap destination IP address 0.0.0.0
sysContact (No input)
sysLocation (No input)
sysName (No input)
Trap
Link state change
(Ethernet)
Disable, enable
Link state change
(wireless LAN)
Disable, enable