User's Manual

8. Appendix
66
NZ2WL - xxx
Table 8.1. Initial Setting List <3 / 5 >
Item Default setting
Beacon interval (AP only) 100, 20 - 1000 (ms)
DTIM (AP only) 1, 1 - 255
QoS Disable, enable
WDS (AP only) Disable, enable
Power-save Mode (ST only) Disable, enable
Scan Channels (ST only)
(No input)
AP Aging Time (ST only) 120, 10 - 120 (seconds)
Original Login Trial Time (ST only) 60, 3 - 60 (seconds)
Disconnect Time (ST only) 10, 1 - 10 (seconds)
IP Tunnel (ST only) Enable, disable
Roaming Notification Retry Count (ST only) 1, 0 - 3
Encryption Disable, WEP, AES, AES-OCB, TKIP
WPA function
Disable, WPA-PSK, WPA2-PSK
(AP only) WPA, WPA2, WPA-AUTO-PSK, WPA-AUTO
Default key #1, #2, #3, #4
Size #1 - #4
Disable,
64bit (10digits), 128bit (26digits), 152bit (32digits): WEP
Disable, 128bit (32 digits): AES / AES-OCB
Disable: TKIP
Key #1 - #4 (No input)
Key update interval (AP only) 60, 0 - 65535 (minutes)
WPA encryption key (No input)
WSL
Type Disable, enable (Type1), enable (Type 2)
Key (No input)
ESSID security (AP only) Disable, enable
MAC address filtering (AP only) Disable, enable
IEEE802.1X
IEEE802.1X function Disable, enable
MAC Address Authentication Function (AP only) Disable, enable
Reauthentication Interval (AP only) 60, 2 - 4320
WPA Reauthentication (AP only) Disable, enable
WPA Reauthentication Interval (AP only) 1440, 2 - 4320
(RADIUS server) IP address (AP only) 0.0.0.0
(RADIUS server) Port number (AP only) 1812
(RADIUS server) ESSID (AP only) (No input)
(RADIUS server) Pre-shared Key (AP only) (No input)