User's Manual

8. Appendix
64
NZ2WL - xxx
8. Appendix
BSHardware Setup
Switch 1
:
OFF
Switch 2
:
OFF
Figure 8.1. DIP Switch
Initial Setting
Table 8.1. Initial Setting List < 1 / 5 >
Item Default setting
Basic setting
Host name (No input)
DHCP Client Disable, enable
IP address (Displayed on the housing sticker on the main unit)
Subnet mask 255.0.0.0
Default gateway 0.0.0.0
AP construction Compatibility, integration
AP type Normal, master, back up
IP address of the master AP 0.0.0.0
IP address of the backup AP 0.0.0.0
Language setting English, Japanese
Password (No input)
Ethernet
Port speed
Auto, 100M/full-duplex, 100M/half-duplex,
10M/full-duplex, 10M/half-duplex
Link down sense
Wireless LAN Disable, enable
Link down condition Link status, Ping
Ping parameter
IP address 0.0.0.0
Transmission interval
(seconds)
60, 1 - 65535
Response wait time 3, 1 - 15
Number of retries 3, 0 - 15
Wireless LAN
Interface Enable, disable
Wireless LAN standard IEEE802.11a, IEEE802.11g, IEEE802.11b
Wireless link mode Standard, compatible, advanced (AP only)
Unit type AP, station
XR function Disable, enable
ESSID
(32 alphanumeric characters, capital/small
character distinction)
LocalGroup
ON
1 2