User's Manual

6. Maintenance

NZ2WL - xxx

Time Setting

Set the time on this product. Enter the year (4 digits), month, day, time (24-hour notation), minute, and

second, and then click the [Update] button. If you enter one digit for the month or day, a zero will be

added to display the month or day in two digits. You can enter either one digit or two digits with an

added zero. (Example: 2010/8/12 13:06:01)

Clicking the [Set PC Time] button copies the time of the internal clock of the PC with the browser

opened to the input form.

Initialization

There are three ways to initialize this product (recovering the factory default settings).

- Using TELNET

- Using a web browser

- Using the DIP switch of the main unit (INIT)

Each initialization method is described below.

Using TELNET

Follow the instructions below to initialize the product using TELNET.

(1) Use TELNET to log in to this product.

(2) In the main menu, select "8. Default".

(3) Enter “Y” for the question “Load default setting? (Y/N)”

(4) For the question “Load default IP address? (Y/N)”, enter “Y” to initialize the IP address as well or

“N” to leave it unchanged.

(5) From the main menu, select “4. Reboot” - “1. Cold boot”, and then enter “Y” for the question “Save

the setting? (Y/N)”. Then reboot the product.

Saving the setting and rebooting the product after loading the default setting initializes the product.

If the default setting is loaded by mistake, select “1. Exit” from the main menu and enter “N” for the

question “Save the setting? (Y/N)” without rebooting the product. This allows the setting to be

unchanged and terminated.