User's Manual

5. Setup and Status Display
56
NZ2WL - xxx
■
Log Information
Log information recorded in this product is displayed. To clear log information, click “Clear log
information”.
For main events displayed on the logs and their outlines, see the table below.
Table 5.8. Events to Be Logged
Event Description
Start Indicates that the AP has been activated.
Link Up Indicates that the wired link has been connected and the link speed.
Link Down Indicates that the wired link has been disconnected.
Login Indicates the MAC address of the wireless terminal connected to the AP.
Logout Indicates the MAC address of the wireless terminal disconnected from the AP.
Login NG
Indicates that the filter function rejected an attempt to log in by an unregistered wireless
terminal.
Roaming Indicates the MAC address of the wireless terminal roaming into the AP.
Tunnel Start Indicates the MAC address of the wireless terminal that has started IP tunneling.
Tunnel Stop Indicates the MAC address of the wireless terminal that has terminated IP tunneling.
Application Login
Indicates the IP address of the terminal that has used an application (such as TELNET and
FTP).
Application Logout
Indicates the termination of an application and the IP address of the terminal that used the
application.
Write Firmware Not available on this product.
Write Config Indicates that the Config file has been written.
Manual Reset
Indicates that this product has been restarted using a web browser, TELNET, and other
methods.
Auth Success Successful authentication
Auth Error Authentication error
Preauth Success Successful preauthentication
Preauth Error Preauthentication error
Figure 5.1. Simplified Log Display