User's Manual

3. Connecting to Devices and Setup Methods

NZ2WL - xxx

TELNET Key Operation

Select items from the TELNET menus by entering the corresponding number. In addition to numbers,

the following commands can be also used. The keys can be used in all the menus. Capital and small

letters are not differentiated.

TT Return to top menu

E Escape from the current operation

M Return to previous menu

GO Jump to the specified category

JP Change to Japanese mode (SHIFT

JIS)

US Change to English mode

W Save settings

BYE / OFF End

H or ? Display a list of commands (Help screen)

It takes approximately 5 - 10 seconds to save settings (writing to internal flash memory). During

that period, the POWER and WLAN LEDs at the front part of the main unit flash simultaneously.

Do not reboot or turn off the product until the screen indicates the completion of the saving process.

The setup file data and firmware data may be damaged and the product may not operate properly if

it is rebooted or switched off during the saving process.

CAUTION