User's Manual

3. Connecting to Devices and Setup Methods
18
NZ2WL - xxx
Setup Using TELNET
After login, enter the number of the item shown in the top menu depending on the desired execution,
and then press “Enter”. To perform configuration, enter “2” for “Configure”.
The items in the top menu are as follows.
Table 3.1. TOP Menu
Menu Description
1. Exit Exit terminal setup.
2. Configure Selected to configure settings.
3. Write Configuration Used to save the settings.
4. Reboot
Reboots the product. Reboot the product after changing the settings (after data write).
The new settings become enabled after the reboot.
5. Update System Parameters Changes the password or date.
6. Download Downloads the setting file.
7. Upload
Sends the settings file from the connected personal computer (terminal) to the
product and updates the settings.
8. Default Restores the settings to the factory default settings. The IP address can be excluded.
9. Status Used to check the setting details and the status after startup.
Each item also has further subdivided sub-items. Enter the number of the desired sub-item.
After selecting a setting sub-item, a value is required to be entered. Enter an appropriate value.
A list of the values which should be entered can be displayed by entering “H” or “?” when entering a
value. When which value to enter is not clear, refer to “H or ?".