User Manual

4. Setup Preparation
FX-DS540-APDL-U
37
4. Setup Preparation
This chapter gives an overview of how to setup the AP and describes how to access the AP settings using
a web browser.
Setup Methods
Although the FX-D540-APDL can be set up precisely to construct an advanced wireless LAN
environment, there are two different setup methods available: web browser and TELNET.
The key features of each setup method are as follows.
WWW browser
- Provides an easy to use graphical interface.
- Setup can be performed remotely (via a LAN or modem).
- Independent of PC platform (type of OS, etc.).
- Requires that the network IP address of the AP be the same as the network IP address of the PC used
for setup.
TELNET
- Setup can be performed remotely (via a LAN or modem) and even from older PCs.
- This setup assumes that the IP address of the AP and that of the PC used for setup belong to the same
network group.
- It is necessary to connect the setting device to this product directly.
- Cumbersome text-only interface.
Browser, TELNET
FX-DS540-APDL/APL
LAN
POWER
WLAN
LAN
F&eI
T
Figure 4.1. Setup image