User Manual
8. Appecdix
FX
-
DS540
-
AP
DL
67
8. Appecdix
Factory Default Settings List
Hardware Setup
- FX-DS540-APDL
switch1 : OFF
switch 2 : OFF
O N
1
2
Figure 8.1. DIP Switch
Initial setup
Table 8.1. Initial setup list (1/4)
Setting item Setting contents(First default)
<Base setting>
Host name ( Enter a string of up to 16 single-byte
alphanumeric characters.)
(Blank)
DHCP client Disable / Enable
IP address (When disabled setting of DHCP client sets :
enable)
Seal on the back of housing
Subnet mask 255.0.0.0
Default gateway 0.0.0.0
Access point construction Compatible, Integrated
Access point type Normal , Master, Backup
IP of master AP (It is set when normal or backup) 0.0.0.0
IP of backup AP (It is set when normal or backup) 0.0.0.0
Language setting Japanese, English
Password ( single-byte alphanumeric characters can be
up to 31 characters long and .the password is case
sensitive.)
(Blank)
<Ethernet>
Port speed
Recognization automatically, 100M /full, 100M/half duplex,
10M/full, 10M/half duplex
Link down sense
Disable, Enable (corresponding to 5/2.4GHz only when unit
type access point.
11g: The function when selecting IEEE802.11g.
AP: The function when unit type is access point.
ST: The function when unit type is station.