User Manual
3. Setup
30
FX
-
DS540
-
AP
DL
Power Supply Connection
This product has two methods to supply the power.
Using the attached AC adapter
Plug the AC adapter into a wall outlet, then connect the DC jack to the power plug in the main unit.
Using the UTP cable (Optional POW-CB20, POW -CBM4 are necessary.)
As the FX-DS540-APW contains a power supply separator unit, it can be powered directly from the
POW -CB20 or POW -CBM4. Power supply separator unit POW-SP20 is not used.
To supply power to the unit using a UTP cable, refer to the PW-CB20 or POW -CBM4’s instruction
manual to connect it correctly. And use UTP cable having category 5.
U sing the attached AC adapter Using the UT P ca bl e
AC a da pter
HU B
*Cab le length b etween this product a nd P C or HUB i s less tha n 90 m.
*1 : Opti onal TP-03 (3 m), TP-0 5(5m), TP -1 0(10 m), TP-20 (2 0m), T P-5 0(50 m) ca n b e used.
*2 : Opti onal TP-X (Cross cabl e and at tachm ent which are 30cm) ca n be used.
U PLINK 8 X 7X 6X 5X 4 X 3X 2X 1 X
Strai ght cab le*1
Cross cabl e*2
Straig ht
ca bl e*1
P C (N IC)
Enl arged fi gure
P OW-CBM4
P OW-CBM4
HUB
U TP cab les are
a ll starai ght ca bl es*1
POWER
WLA N
LAN
POWER
WLA N
LAN
POW ER
W LAN
LAN
UPLI NK 8X 7X 6X 5X 4X 3X 2X 1X
A
P
HUBA
P
HUB
Figure 3.7. Power Supply Connection
CAUTION
- Do not connect any AC adapter other than the accessory. Doing so may result in a failure in the
device or an accident. Note, in particular, that the AC adapters bundled with the FX-DS540-APP
and FX-DS540-APW are different in voltage while being identical in shape.
- The power supply from the UTP cable is corresponding to the optional POW -CB20/POW -CBM4.
You cannot use the power supply unit of another company. Doing so may result in a failure in the
device or an accident.
- Do not connect the AP-side UTP cable of the POW-CBM4 to a device such as a hub as doing so
can cause a device fault or accident.
- The power supply cannot be done by the power supply separator unit POW -SP20. Doing so may
result in a failure in the device or an accident.