Operation Manual

Medical Test Supply www.medicaltestsupply.com

Chapter10 BP Measurement

10.1 Accurate Measurement Way

Measurement in quiet and relaxing state.

1. Place your arm on a table.

2. The cuff is level with your heart.

3. The palm of the hand is up, and the body relax.

Try to measure your blood pressure at the same time each day with the same arm

and the same pose for consistency.

The high and low location of cuff will cause changes in measurement results.

Do not touch Electronic Sphygmomanometer, cuff or windpipe during measurement.

Measurements should be taken in a quiet place and the body relaxed.

Remain still 4~5 minutes before measurement.

Relax the body, muscle activity will affect readings.

Do not talk or move during the measurement.

Wait 4~5 minutes between measurements.

Do not use a cellular phone near the device.

10.2 BP Measurement

Press 【START/STOP】 button to take a measurement.

Start Measurement Measurement result

During measurement, please keep correct pose and quiet state, do not move.

Stop Measurement

During measurement, if you wish to stop measuring, press 【START/STOP】 button to stop and

deflate.

Confirm Measurement Value

Measurement value can be automatically stored. ([using memory function] refer to 10 page)

*Self-diagnosis and treatment using measured results may be dangerous. Follow the

instructions of your physician.