User's Manual
8
Chapter13 Bluetooth Data Sending
The sphygmomanometer can send the storage BP value to PC through bluetooth.(refer to
software help for details)
Users connect the sphygmomanometer to PC after searching it on PC client, after completing the
connection, data will transmit to PC through bluetooth. After the sphygmomanometer finished
data transmission, it will mark in the measurement review interface. This mark is a green dot, it
on the right side of the top right corner serial number in memory interface; it on the left side of
left serial number in BP list interface. Note: when sphygmomanometer time error, the device
manage measurement data but does not upload it, now the dot in memory interface is red.