User's Manual

6
Chapter12 Memory Fuction
The devicer is designed to store and display the blood pressure, pulse rate values and the date and
time when measured, which are up to 100 groups. If there have been stored 100 groups, the
earliest results will be deleted when saving the 101 group of measurement results.
12.1 Read Memory Values
1. In the main interface (interface when boot-strap), press 【MEMORY】 button to review the
most recent measurement values in large-print, press 【LIST】 button to enter data list interface.
The device displays memory value with the number from 1 to 100. The little dot which is behind
serial number represent that the data has been uploaded or the data was measured at wrong
device time.
2. Press 【UP】/【DOWN】 button to circularly switch the former measurement values.
Press 【LIST】 button to enter the data list interface. The little dot which is before serial number
represent that the data has been uploaded or the data was measured at wrong device time.
3. Press 【TREND】 button to enter the trend graph interface.
*The right figure shows that there is no Measurement result