User's Manual

5
During measurement, please keep correct pose and quiet state, do not move.
Wish to stop measurement
During measurement, press 【START/STOP】 button, stop press，release the air from the cuff.
错误！未找到引用源。Confirm the Measurement Value
The measurement value can be stored automatically, using [memory function] (refer to
Chapter12).
*Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions
of your physician.
错误！未找到引用源。In no physiological alarm state, press any button to carry on the
corresponding button function; in audio alarm state, press any button (except 【ON/OFF】 button)
to clear up the audio alarm.
④Take off the cuff, press 【ON/OFF】 button to turn the device off.
*The device will automatically turn off after 1 minute in which there is no operation to the
device and no connection with SpO
2
probe, even if you forget to turn the power off.
Note
 Wait 4-5 minutes between measurements.
When repeated measurements, because, the arm appears congestion, it may not get correct
blood pressure measurement. After the blood flow, take a measurement once again.
 When some factors affect the measurement results in measurement process, error
messages will appear on the screen, you can obviate the malfunction and restart a
measurement.