User's Manual

3
Chapter11 Application of the Sphygmomanometer
11.1 Accurate Measurement Way
11.2 Applying the Cuff
When measuring, take the thick clothes off instead of rolling up the sleeves.
In order to measure accurately, pay attention to applying the cuff properly (left arm).
① Insert the arm cuff air plug in the cuff socket of sphygmomanometer.
Measurement in quiet and relaxing state.
1.Place your elbow on a table.
2.The cuff is level with your heart.
3.The palm of the hand is up, and the body relax.
Try to measure your blood pressure at the same time each day with the same arm
and the same pose for consistency.
The high and low location of cuff will cause changes in measurement results.
Do not touch Electronic Sphygmomanometer, cuff and windpipe during measurement.
Measurements should be taken in a quiet place and the body relax.
Remain still 4~5 minutes before measurement.
Relax the body, do not let the muscle activity.
Do not talk and movement during the measurement.
Wait 4~5 minutes between measurements.
Please use the sphygmomanometer at an environment of suitable temperature and
humidit
y(
refer to Cha
p
ter20
)
, otherwise it will cause
m
easurement error.
The measurement can be carried out by applying the cuff on left or right arm.
Bare your arm or cloth close-fitting clothing during measurement.
Carry out the operation in a room with comfortable temperature.