User's Manual

Chapter5 Dry Battery/AC Adapter Installation

This product can use dry batteries as well as AC adapter.

5.1 Dry Battery Installation

① Demount the battery cover in the direction of the arrow.

② Install "AA" dry batteries according to

polarities.

③ Slide to close the battery cover.

Icon

“ ” : the batteries power will exhaust. Replace with four new batteries (the same

sort) at the same time. Test while low power may cause data deviation and other problems.

Turn the unit off before replacing the batteries.

Note

Dispose of the batteries according to applicable local regulations about environmental.

5.2 Using the AC adapter

① Connect sphygmomanometer and the AC adapter. Insert the AC Adapter Plug into the

AC Adapter socket on the right side of the device.

② Please insert the power plug of AC adapter into the AC 100V～240V socket.

Note

When cut off the power, first cut off the connection of power socket and the regulated

power supply, then cut off the connection of regulated power supply and the

sphygmomanometer.

Please be sure to use dedicated AC adapter.

Note

When regulated power supply and dry batteries are both used at the same time, the dry

①

③

②