Specifications

50 Installation Procedures
Connecting the FireWire Cable
For information about connecting the FireWire cable, see Working in
Tethered Mode, page 65.
Removing the Leaf Digital Camera Back from the Camera Body
1. Place the camera on a solid, steady surface.
2. If any of the following cables are connected, disconnect them:
• FireWire cable
• Camera-to-Back Sync cable
• Flash Sync cable
3. Slide and push the Release button.
Figure 48: Removing the Leaf AptusII digital camera back from a Mamiya RB
camera
4. Tilt the camera back away from the camera body to remove it.
Release Button