Specifications

44 Before Getting Started
Before Getting Started
This chapter describes the Leaf AptusII digital camera back installation for
the Mamiya RB camera.
Items Required for the Installation
For a detailed list of the items required for installation, see Items Required
for the Installation, page 4. In addition to the items shown, the Mamiya RB
digital camera back kit also includes the Mamiya RB adaptor plate. You will
need the plate for the installation procedure.
Important! To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
Quick Installation Reference
1. Install the focusing screen mask into the viewfinder.
2. Mount the adaptor plate on the camera body.
3. Remove the protective cover from the Leaf AptusII digital camera
back.
4. Attach the digital camera back to the adaptor plate.
5. Connect the Camera-to-Back Sync cable between the camera lens
and the Leaf AptusII digital camera back
. If you are working in
tethered mode, go to step 7 now.
6. Install the compact flash card. The installation is complete.
Working in tethered mode:
7. Install the Leaf Capture application from the CD and start the
application.
8. Connect the FireWire cable between the computer and the
/HDIAptusII di
gital camera back.
After you connect the cable, the application automatically connects
to the Leaf AptusII digital camera back. When the connection is
established, the LED indicator on the digital camera back turns from
orange to green.
Note: If you want to work with
an external flash or strobe, connect the Flash
Sync cable between the Leaf AptusII digital camera back and the flash or
stro
be unit.