Specifications
38 Before Getting Started
Before Getting Started
This chapter describes the Leaf AptusII digital camera back installation for
the Contax 645 camera.
Items Required for the Installation
For a detailed list of the items required for installation, see Items Required
for the Installation, page 4.
Important! To avoid installation and operation problems, use only the
accessories supplied in the Leaf AptusII digital camera back kit.
Quick Installation Reference
1. Install the focusing screen.
2. Remove the protective cover from the Leaf AptusII digital camera
back, and mount the back onto the camera body. If you are working
in tethered mode, go straight to step 4.
3. Install the compact flash card. The installation is complete.
Working in tethered mode:
4. Install the Leaf Capture application from the CD.
5. Start the Leaf Capture application.
6. Connect the FireWire cable between the computer and Leaf AptusII.
After you connect the cable, the application automatically connects to
the digital camera back. When the connection is established, the LED
indicator on the digital camera back turns from orange to green.
Note: If you want to work with an external flash or strobe, connect the Flash
Sync cable between the camera and the flash or strobe unit.