Specifications

36 Installing the Focusing Screen
Figure 33: Connecting a Camera Control cable to a Hasselblad 503CW camera
Connecting the FireWire Cable
For information about connecting the FireWire cable, see Working in
Tethered Mode, page 65.
Removing the Leaf Digital Camera Back from the Camera Body
1. Place the camera on a steady, flat surface.
2. If any of the following cables are connected, disconnect them:
• FireWire cable
• Camera-to-Back Sync cable
• Flash Sync cable
3. Slide the Release button to the right side.
Figure 34: Removing the Leaf AptusII digital camera back from a Hasselblad
camera
4. Tilt the camera back away from the camera body to remove it.
Release Button