Operation Manual

5-8
5
Using the P Playback Mode Functions
Supported images: Still images/movies
This feature allows you to protect your images to ensure that they are not inadvertently
erased.
3 Press the OK button
E
to begin message
playback.
The table below shows the operations that can be performed
during message playback.
4 Press the OK button
E
to stop voice message playback.
[PROTECT]
Protecting Images from Accidental Erasing
Protecting an image
1 Switch the camera on and press
O
or
Q
on the mode
button until the “
P
” icon lights on the mode select LED.
2 Press the MENU button
K
to display the menu icons.
3 Use
L
or
R
on the 4-way button to select
PROTECT [ ] and then press the OK
button
E
.
4 Use
L
or
R
on the 4-way button to select the image to be
protected.
5 Use
U
on the 4-way button to select [SET]
and then press the OK button
E
to set the
image protection.
The [ ] icon appears on protected images.
Button Description
U
Increases the volume.
D
Decreases the volume.
L
Hold down to play back the message at half speed.
Release the button to return to normal playback.
R
Hold down to play back the message at double speed.
Release the button to return to normal playback.
Finecam_E.book Page 8 Thursday, August 28, 2003 6:21 PM