Operation Manual

2-20

Basic Operations

• You do not need to install the USB drivers on a Macintosh computer. Connect the USB

cable without installing any drivers.

• To view images on your Macintosh, you must have image-viewing software already

installed. (To play movies, QuickTime 4.1 or later must be installed.)

• You cannot check images on your Macintosh unless there is a memory card in the camera.

Connecting to a Macintosh

Viewing images on a Macintosh computer

1 Load the memory card into the

camera. ( p.1-3)

2 Connect the AC adapter to the

camera.

3 Connect the camera to your

Macintosh using the dedicated USB

cable and then start up the

Macintosh.

• Check the size of the USB connectors. The small

connector plugs into the camera and the large

connector plugs into the USB port on your

Macintosh.

Finecam_E.book Page 20 Thursday, August 28, 2003 6:21 PM