Operation Manual

2-8
2
Basic Operations
This feature allows you to check data such as the aperture and shutter speed settings for an
image you have just shot and to erase the image.
• If you press
D
again while a photographed image is displayed, a message screen appears
asking you to confirm whether you want to erase the image. To erase the image, use
U
to select
[EXECUTE] and then press the OK button
E
.
Checking Photography Data and
Erasing Images
–
Manual REC Review
1 Immediately after taking a picture in
“
C
” mode, press
D
on the 4-way
button.
The last image you shot appears on the LCD
monitor.
2 Press
U
on the 4-way button.
The photography data is displayed.
• See p.7-6 for detailed information on the screen
displayed.
3 Press the shutter release button half way to return the camera
to the original shooting mode.
Deleting Unwanted Images –
Erasing Images
1 Press
O
or
Q
on the mode
button until the “
P
” icon lights on
the mode select LED.
The last image you shot appears on the LCD
monitor.
•Press
L
or
R
on the 4-way button to select the image to
be erased.
Finecam_E.book Page 8 Thursday, August 28, 2003 6:21 PM