Operation Manual

1-6
1
Camera Preparations
The first time you use your digital camera, you must set the date and time.
The date and time settings may also be cleared when you remove the battery pack or if you
leave the camera unused for a long period. If this happens, reset the date and time.
■
Viewing the battery level and charging guide
Setting the Date and Time
1 Press the
O
or
Q
on the mode
button until the “
G
” icon lights on
the mode select LED.
The setup menu appears.
2 Press
U
or
D
on the 4-way button
to select [DATE] and then press
R
.
Fully charged At least
half used.
Charge low.
Charge
the battery soon.
Camera will not
function.
Charge the
battery.
When the battery charge is completely depleted, the
“LOW BATTERY” message appears on the LCD monitor.
Depending on the environment in which the digital camera is
being used, the amount of power consumed may increase.
Even if the battery level icon is displayed, the camera may
switch itself off in some camera operating conditions.
When this occurs, charge the battery.
Finecam_E.book Page 6 Thursday, August 28, 2003 6:21 PM