Operation Manual

6-3
6
G Using the SET UP Mode Functions
You can adjust the LCD monitor brightness through 5 levels. Set the brightness to your
preferred level.
2 Press
U
or
D
on the 4-way button to select
[AF METHOD] and then press
R
.
3 Press
U
or
D
on the 4-way button to select
the desired setting and then press the OK
button
E
.
4 The selected AF method is set and the screen in step 2
reappears.
[BRIGHT CNTRL]
Adjusting the LCD Monitor Brightness
1 Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2 Press
U
or
D
on the 4-way button to select
[BRIGHT CNTRL] and then press
R
.
3 Press
U
or
D
on the 4-way button to select
the desired setting and then press the OK
button
E
.
+2: Sets the maximum brightness.
+1:
Sets the brightness slightly higher than normal.
STANDARD: Normal level of brightness. (default)
–1: Sets the brightness slightly lower than normal.
–2: Sets the minimum brightness.
4 The selected brightness is set and the screen in step 2
reappears.
Finecam_E.book Page 3 Thursday, August 28, 2003 6:21 PM